Hydrocyclone Desander For Drilling Mud, HDD, Mining And Waterwell

Desander uses hydrocyclone to remove above 44-micron solids from drilling fluid. Desander has two models: with a shaker or without a shaker each of which can be tailored to your requirements from recycling to dewatering drilling fluid.

Specifications

As solids control equipment for the second stage of the drilling operation, a desander is used to remove harmful solid particles of 40-74µm in drilling liquid. Suspending particles can be separated from the liquid under the centrifugal acceleration, by use of the working principle of centrifugal subsidence.

Built on API RP 13C, with the certificate of authority to use the official API monogram.

Desander is an important equipment for drilling liquid-solid control. It is mainly used for the second phase purification of drilling liquid. It removes nocuous solid, stabilizes drilling liquid properties, and improves drilling efficiency. The hydrodynamic cyclone of the desander is made of wear-resistant cast iron. It is reliable, effective, and serves long. The content of sand after the desander is controlled below 0.15%.

The key parts of Desilting and Desanding are the hydrocyclones, AIPU Machinery quality hydrocyclone are made from high-density abrasion-resistant polyurethane. The unique internal manifold design minimizes the back pressure on the hydrocyclones maximizing the solids removal. Fine-tuning is achieved through adjustable orifice openings at the discharge point on the cone.

Features:

• Versatile Deal with weighted or un-weighted drilling fluid.
• Environmentally efficient Removing and drying drilled solids help meet environmental regulations by minimizing waste generated and reducing disposal costs.
• Minimizes maintenance Continuous removal of sand and abrasive cuttings from drilling fluid cuts downtime and reduces repair and replacement of worn parts on downstream equipment.
• A wide range of designers for your drilling-fluid system Aipu desanders is available in a variety of configurations.
• Work oil-based or water-based mud both Our desanders are designed to work with either oil-based or water-based weighted muds, as well as with either dispersed or non-dispersed muds.

Benefits:

• Design: Adopt ANSYS limited element analysis to optimize the structure.
• Material: Use Q235B from BAOSTEEL for the body, and High strength compound rubber material is used to reduce shock.
• Vibration motor: Italy OLI /American Martin, or according to customer requirement.
• Electrical control system: Explosion-proof electrical control system with electrical components as ABB, Siemens, Schneider
• Treatment: Grinding, Abrasive blasting, Epoxy zinc-rich primer, Intermediate painting with epoxy micaceous iron, and Finish painting with polyurethane
• Hydro cyclone cone: Made of wearing-resist polyurethane and in a structure similar to the design.
• Inlet and outlet: Fast joint connection.

Aipu's Desander is an economical and practical desanding device. It is used as the second stage of the solids control system, separating solid particles next stage equipment.

Video:

AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system.

All items can be used in oil and gas drilling, the oil sludge treatment, the HDD mud recycling, the civil construction micro tunnelling, the piling and so on. The main equipment inlcuding solids control system, shale shaker, mud cleaner, centrifgue decanter, degassers, agitator, mud gun, centrifugal pumps, mud tank, cuttings dryer, the mud cooling system and so on.

Pleased to say AIPU products have been delivered to many regions and conturies around the world. Including Germany, Russia, USA, UK, Kuwait,  UAE, India, Indonesia, Malaysia, Singapore, Taiwan, and so on.

Our hot sales product Hunter series shale shaker is rather popular with all of our clients. The Hunter-MG and Hunter-D shale shakers can be configured as linear motion, BEM or the dual motion. For the decks, they can be double deck. For the base, they can be dual tandem or triple tandem

Another hot sales products Hunter seires mud cleaner is maintained all the good features of Hunter series shaker. And the hydrocylones are all made of high quality polyurethane. Another feature is the cones are interchangeable with famous brand ones.

Besides the shale shaker and mud cleaner, there are centrifugal pumps, mud agitators and so on equipment appreciated by our clients. New innovated mud cooling system for land oil drilling is a patented products used in SINOPEC drilling site. The performance surprised end users.

Why clients select AIPU?

It's because of high qualty and the reasonable cost happened during our cooperation. We are professional on solids control, mud process, sludge treatment. Among all the orders there are over 80% orders are repeat orders from our regular clients or recommned by them

Are you in the demand of solids control or other mud treatment-related items now? Please come to us freely. Trust you will be surprised by AIPU products and servcies. All the solutions will be optimal and soonest one.