Mud tank-installed Bolt Flanged Connection Vertical Drilling Mud Gun APNJQ50

Mud gun is operated as the equipment to supplement drilling mud or mixing mud. Mud guns number decided by tank size. Mud gun is usually mounted on the square tube of mud tank top frame. Or it can be mounted close to mud tank.

According to the inlet pipe size, there are 2-inch mud guns and 3-inch mud gun for option. According to different structure features, there are two types of mud gun: fixed mud gun, and rotary mud gun.

Vertical drilling mud gun APNJQ50 specification

More information about mud gun

Mud guns are also referred to as jet mixers. They are best used in tank corners to keep solids from settling and a mud agitator is placed in the tank center. Mud guns number is the same as the agitator number. Usually, 3 meters per set mud gun. Mud guns can help to mix drilling fluids completely, which even at the corner of mud tank. Besides mix drilling fluids, mud guns also help to clean mud tanks when necessary.

The length of mud gun defined by mud tank depth or height. Similar as the shaft on mud agitator. Mud guns connected with the mud gun lines on tank top. The line is 2'' or 3''. The mud gun inlet is 2'' or 3'' accordingly. Besides the mud gun length and diameter, the mud gun nozzles and rotatable or not are also customer-built.

Nozzle number of mud guns can be 2, 3 or 4. And the Pressure can be normal pressure or middle pressure or high pressure. Mud gun is made of high-quality seamless pipe connected with flange and valve, and the polyurethane nozzle. The rotation angle can be 0~360°. Some clients prefer the rotatable mud gun since to mix mud without a dead corner. And more flexible on jet position.

Types of vertival mud gun

Except for 2in mud gun, we also have made mud gun with 3in and 4in pipe, the pressure range is 0.1Mpa~6.4Mpa. Higher pressure will perform better and safe jet work during drilling fluids mixing by mud guns. The mud gun assembly including handle, valve, flange, pipe, and nozzle. On the rotatable mud gun, there is a bearing between the elbow and the submerged pipe.

What difference between different types of mud guns?

The bottom-type mud guns are connected with the bottom mud line and the nozzles are at higher positions, while the non-spin type is designed for mixing large volumes of fluids on top of a tank or pit also for transferring mud from compartment to another. It's more flexible to install mud gun in any position necessary.

For any interest or demand on the mud guns, please feel free to contact AIPU Solids. You will get a free offer and optimal solutions very soon

AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system.

All items can be used in oil and gas drilling, the oil sludge treatment, the HDD mud recycling, the civil construction micro tunnelling, the piling and so on. The main equipment inlcuding solids control system, shale shaker, mud cleaner, centrifgue decanter, degassers, agitator, mud gun, centrifugal pumps, mud tank, cuttings dryer, the mud cooling system and so on.

Pleased to say AIPU products have been delivered to many regions and conturies around the world. Including Germany, Russia, USA, UK, Kuwait,  UAE, India, Indonesia, Malaysia, Singapore, Taiwan, and so on.

Our hot sales product Hunter series shale shaker is rather popular with all of our clients. The Hunter-MG and Hunter-D shale shakers can be configured as linear motion, BEM or the dual motion. For the decks, they can be double deck. For the base, they can be dual tandem or triple tandem

Another hot sales products Hunter seires mud cleaner is maintained all the good features of Hunter series shaker. And the hydrocylones are all made of high quality polyurethane. Another feature is the cones are interchangeable with famous brand ones.

Besides the shale shaker and mud cleaner, there are centrifugal pumps, mud agitators and so on equipment appreciated by our clients. New innovated mud cooling system for land oil drilling is a patented products used in SINOPEC drilling site. The performance surprised end users.

Why clients select AIPU?

It's because of high qualty and the reasonable cost happened during our cooperation. We are professional on solids control, mud process, sludge treatment. Among all the orders there are over 80% orders are repeat orders from our regular clients or recommned by them

Are you in the demand of solids control or other mud treatment-related items now? Please come to us freely. Trust you will be surprised by AIPU products and servcies. All the solutions will be optimal and soonest one.