APFI Flare Ignitor Device Use And Detail During Oil Well Drilling

The flare ignitor is used to process tail gas and gas from poor boy degasser. Usually flare ignition is oerated with mud gas separator (poor boy degasser). They are used together to process the toxic gas. The flare ignitor is a security equipment. We also treat it as environment protection equipment. It burns harmful gas to eliminate the harm to the environment.

Flare ignitor device working

The gas is carried by pipeline to the safe burner inlet.
Connect and turn on flare igniter current conversion and a voltage amplifier circuit
Open the gas tank and operate the electronic igniter and ignite the fire tube. (the first stage ignition)
Open the gas vent gate cutting, the burning fire tube will ignite gas. (the second stage ignition)
Turn off the gas tank and extinguish the fire tube, combustible gas burning completely

Flare ignitor device operation tips

We must prevent any damage on ignition wire during transportation, hoisting, etc.
When installing burner, we should be far away from fire.
The bottom of the burner must be fixed firmly, if required by the guy rope
Flare ignition device should be placed in a good environment to protect the electronic components and ensure good performance.
Flare ignition device is usually combined with mud gas separator in drilling mud system.

The advantages of Aipu flare ignitor device

Suitable for various gas during well drilling. Although it’s mixture of various of gas
Product design and development is proved with great performance
Adopt famous matching components, assured a long service life and high performance.
The equipment can realize the ignition distance wired or wireless control 60 meters away, the accurate rate up to 100%
Grinding, sandblasting, epoxy zinc rich primer, epoxy paint, polyurethane paint five processes. Using high-pressure airless spray equipment, greatly enhance the service life of the equipment and artistic effect.

More details of flare ignitor device

The flare ignitor device is necessary equipment in the oil drilling mud recycling system. Aipu produce flare igniter suites for customer’s various requests. If you are interested in it or other solids control equipment please feel free to call or email us.

Why we need flare ingitor? Because the gas flowed out is flammable and poisonous the flare ingition set behind degasser and connected by vent line. The line is requested at least 60m. This will provide a safe job site. The entrained gas including H2S, CO, methane, get them removed and burned out is the safety assured way.

We provide customization service on many equipment. What is the customizable option on the ignitor? Firstly, the material can be common carbon steel for some little or none H2S content places or drilling sites, if necessary, we suggest the 16Mn steel sheet to resist the H2S gas. Furthermore, as we mentioned, the installation way can be horizontal or vertial and the power supply can be solar energy or electricity. And the fuel station can be canned natural gas or the diesel oil. Besises those, the control panle can be local or remote control. And the torch height is customizable, too. Common height is 3m. But some clients prefer higher or lower one.

For the colors, considering the use almost of ignition device are painted with red color. So we don't suggest other surface coat oil. Red means warning and danger.

Please feel free to contact AIPU solids control. Below specification sheet for your reference. Further question just let us know

AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system.

All items can be used in oil and gas drilling, the oil sludge treatment, the HDD mud recycling, the civil construction micro tunnelling, the piling and so on. The main equipment inlcuding solids control system, shale shaker, mud cleaner, centrifgue decanter, degassers, agitator, mud gun, centrifugal pumps, mud tank, cuttings dryer, the mud cooling system and so on.

Pleased to say AIPU products have been delivered to many regions and conturies around the world. Including Germany, Russia, USA, UK, Kuwait,  UAE, India, Indonesia, Malaysia, Singapore, Taiwan, and so on.

Our hot sales product Hunter series shale shaker is rather popular with all of our clients. The Hunter-MG and Hunter-D shale shakers can be configured as linear motion, BEM or the dual motion. For the decks, they can be double deck. For the base, they can be dual tandem or triple tandem

Another hot sales products Hunter seires mud cleaner is maintained all the good features of Hunter series shaker. And the hydrocylones are all made of high quality polyurethane. Another feature is the cones are interchangeable with famous brand ones.

Besides the shale shaker and mud cleaner, there are centrifugal pumps, mud agitators and so on equipment appreciated by our clients. New innovated mud cooling system for land oil drilling is a patented products used in SINOPEC drilling site. The performance surprised end users.

Why clients select AIPU?

It's because of high qualty and the reasonable cost happened during our cooperation. We are professional on solids control, mud process, sludge treatment. Among all the orders there are over 80% orders are repeat orders from our regular clients or recommned by them

Are you in the demand of solids control or other mud treatment-related items now? Please come to us freely. Trust you will be surprised by AIPU products and servcies. All the solutions will be optimal and soonest one.